A Shivlam spatial computing product
iPhone Pro and iPad Pro with LiDAR
Field measurement
without the tape.
DeltaTapeless uses the LiDAR sensor in your iPhone to measure parking lots, walls and full rooms. Scan the space, get the dimensions, send the plan. No tape, no laser meter, no second trip.
Built by the team behind DeltaARBIM, running on live construction sites at 2 cm accuracy.
The real problem
Measuring on site has not changed in fifty years.
A tape, a second person to hold the other end, a notebook, and a photo of the notebook. Then someone types it into a spreadsheet back at the office and hopes nothing got transposed.
The apps that tried to fix this made a different mistake. They scan everything, dump a 3D model on you, and leave you to dig out the one dimension you came for. That is fine for a designer. It is useless for someone with four site visits before lunch.
DeltaTapeless starts with the job, not the scan.
What a tape measure needs. DeltaTapeless needs one.
Capture everything on the first visit. Pull dimensions later, from the scan.
Measurements export straight to PDF and data files.
What it does
Pick the job. The app does the rest.
Three capture modes, each built for a different kind of site work. You choose the module first, so the app knows what it is looking for before you start walking.
Parking Scan
Capture a parking area and get stall layout, dimensions and total area.
Walk the lot and DeltaTapeless captures the bay geometry as you go. Stall widths, aisle widths, total surface area, and the positions of kerbs, columns and obstructions. Built for the estimate you have to send tonight, not a survey you file next month.
Wall Scan
Measure one wall surface, cleanly, without capturing the whole room.
Point at the wall and get its dimensions. Height, width, net surface area with openings deducted automatically. No room scan, no model to clean up, no waiting. This is the fastest module and it is the one most people will open most often.
Room Scan
Scan a room and get a dimensioned floor plan with walls, doors and windows.
Walk the perimeter once. DeltaTapeless builds the room outline, marks door and window openings, and gives you a floor plan with every dimension labelled. Pull any measurement you need from the scan afterwards, from your desk, without going back to site.
Need a capture mode for different work? Tell us on the request form.
How it works
Three steps, under two minutes.
Choose your module
Parking, wall or room. The app configures the capture for that job before you start.
Walk and scan
The LiDAR sensor reads the space as you move. You see the geometry build in real time, so you know it is captured before you leave.
Export and send
Dimensioned PDF, data file, or share link. Straight into your quote, your report, or your client's inbox.
On a working site
This is the app running, not a mockup.
Both screens were captured on a working site on 15 September 2026. Nothing here is a render.
The cyan outline is the wall the app has locked on to. The figure at the top right updates while it measures. Trimmed once in the middle, where the build spends about eight seconds processing.
Another wall from the same session. Width, height and net area, with every edge confirmed. This is the screen you send from.
Who it is for
Built for people who measure for a living.
Paving and line marking contractors
Quote a lot without tracing it off a satellite image.
Painters and interior contractors
Wall areas and material quantities in seconds, on the walkthrough.
EV charger installers
Document bay geometry, clearances and runs on the site survey visit.
Facility managers
Keep a measured record of every space you are responsible for.
Interior designers
Accurate room dimensions without a site day spent with a tape.
Estate agents and property teams
Floor plans from a single walkthrough.
Why Delta
What makes it different.
Job first, not scan first
Every other scanning app captures everything and makes you find your number. DeltaTapeless asks what you are measuring, then captures for that.
Works with no signal
Capture and measurement run on the device. Basements, shells, remote sites, no problem.
Output your office can use
PDF, CSV and 3D file export, not a proprietary format that traps your data.
Priced for working contractors
Built in India, priced for the field, not for enterprise software budgets.
From a real spatial computing team
DeltaTapeless comes from the team behind DeltaARBIM, an AR BIM platform verifying structural work on live job sites.
What you get back
Work out what the tape is costing you.
Your numbers, not ours. Move the sliders.
Based on a 2 minute capture. Your times will vary by space and site conditions.
Requirements
What you need, and what you get.
What you need
- iPhone 12 Pro or newer, or iPad Pro from 2020 onwards. The LiDAR sensor is on Pro models only.
What you get
- Dimensioned PDF plan
- Measurement data export
- 3D model export
Part of the Delta family
Built by a spatial computing company.
We build products that turn physical space into data you can act on. DeltaTapeless is built by Shivlam, in Ahmedabad.
Our flagship product, DeltaARBIM, overlays coordinated BIM models onto real structures on live construction sites, accurate to 2 cm. DeltaTapeless runs on the same capture and reconstruction engine, stripped down to the measurement job and put in a pocket. So does DeltaRoomCraft, which takes the same room scan and turns it into a floor plan you can lay furniture into at true scale.
Get DeltaTapeless.
For contractors, estimators and facility teams. Tell us which module you need and we will set you up.
Questions
Before you ask.
Do I need a special device?
You need an iPhone or iPad with a LiDAR sensor. That means iPhone 12 Pro or newer Pro models, or an iPad Pro from 2020 onwards. Standard iPhone models do not have the sensor.
Does it work without internet?
Capture and measurement are designed to run on the device, so you can work in basements, shells and remote sites. Sync and sharing need a connection.
Can I export to CAD or my estimating software?
DeltaTapeless exports dimensioned PDFs and data files. Tell us what your office uses on the request form.
Does it work on Android?
No. It needs the LiDAR sensor, which is on iPhone 12 Pro and newer Pro models and iPad Pro from 2020 onwards.
What does it cost?
It is priced for working contractors, not enterprise software budgets. Send a request and we will share the price for your team.
How is this different from magicplan or Polycam?
Those are excellent general scanning tools. They capture a space and give you a model to work from. DeltaTapeless starts from the task instead. You tell it whether you are measuring a parking lot, a wall or a room, and it captures and outputs for that specific job. If you need a general purpose 3D scanner, use one of those. If you need a dimension in your quote in the next ninety seconds, use this.